Getting over a high tub wall can turn a daily bath into an awkward balancing act, while a small bathroom may not have room for a permanent soaking tub. You need a solution that fits your space, supports the way you bathe, and works with your bathroom rather than against it. These seven options cover accessible conversion kits, portable tubs, sliding shower doors, alcove jetted tubs, and larger soaking models.
A Quick View Of The Lineup
Meet The Standout Selections
A high-sided tub can make a bath feel less accessible, particularly for anyone with limited hip mobility. The CleanCut Convertible Tub Conversion Kit adds a lower step-through section while keeping the original tub available for full-length soaking. For most households seeking accessibility without a complete remodel, that combination makes more sense than replacing the entire fixture.
The removable center insert locks into place for bathing and comes out for shower use, so you are not choosing permanently between two uses. Unlike the fixed jetted tubs later in this list, this kit modifies a tub you already own. You will still need to assess your current dimensions, wall clearances, and installation conditions before ordering.
Positive Takeaways
- The step-through insert reduces the height you must cross during a shower.
- You retain the option to fill the original tub for a conventional bath.
- Removing and replacing the center section makes the change between uses straightforward.
- The kit includes the conversion unit, support structure, adhesive, waterproof wrap, cutting template, and installation guide.
Practical Considerations
- Your existing tub must be compatible with the conversion layout, so measure the opening and surrounding surfaces first.
- This is an accessibility conversion rather than a complete plumbing replacement, which may not suit a full bathroom redesign.
Key Specs
Right Fit For
This kit best suits homeowners who need easier tub access but still want to retain their existing bathtub and avoid a complete renovation.
Look Elsewhere When
Choose the EMPAVA 60 in Jetted Acrylic Soaking Tub instead when you want a complete jetted fixture with adjustable wall placement rather than a conversion insert.
A full-size soaking bath does not need to occupy the bathroom permanently. The BELOAFIE Foldable Adult Soaking Bathtub opens to 53.14 by 20.47 by 21.26 inches, then collapses to roughly nine inches for storage beside an appliance, in a corner, or under a bed. That makes it useful for renters, homes with limited floor space, and trips away from home.
Unlike the CleanCut Convertible Tub Conversion Kit, this is a separate portable tub rather than an insert for an existing fixture. You can use your phone or laptop through the lid without removing it, while the surrounding design is intended to slow heat loss for more than an hour. For most users, the practical trade-off is convenience and portability in exchange for a less permanent installation.
Positive Points
- The nine-inch folded height makes the tub easier to store between uses.
- The 45.67-inch bottom provides a substantial soaking area for one adult.
- You can use a phone or laptop through the lid during a soak.
- Bottom massage rollers add foot movement without requiring another accessory.
- A side drain connection can accept a drain hose for controlled emptying.
Things To Consider
- The stated user range tops out at 6.2 feet tall and 220 pounds, so check those limits against your own dimensions.
- You need a suitable filling and draining plan, especially in locations without a nearby tub connection.
- The unfolded footprint remains larger than most standard tubs.
Made For In Mind
This tub fits people who want a full soaking experience in a compact home, rental, or temporary living arrangement.
Another Choice May Suit
The WOODBRIDGE 61 in Stone Resin Oval Soaking Tub is the better permanent option for a spacious bathroom where a stationary oval design will remain uncovered.
A clear shower door can make a tub area feel larger because the frameless glass adds less visual bulk than a framed enclosure. The WOODBRIDGE 56-60 in Frameless Sliding Shower Door offers two-way movement across a 56- to 60-inch adjustable opening, with a nominal 28.5-inch walk-in width. It works well for visual openness and practical access, though this is an enclosure component rather than a tub.
Compared with the portable BELOAFIE tub, this door serves a permanent bathroom installation. Both glass doors slide, and the stainless steel rollers are designed for quiet movement. You should take measurements only after the finished walls are in place, since tile, back panels, and trim can change the opening you actually have.
Reasons It Performs
- Clear tempered glass gives the enclosure a bright, visually open appearance.
- Two sliding panels can be positioned from either side, adding flexibility around the tub.
- Large stainless steel rollers support smooth movement along the upper track.
- The stainless steel top guide can be trimmed by up to four inches for width adjustment.
- An anti-splash threshold helps contain water at the enclosure opening.
Practical Considerations
- Take final measurements only after the walls, tile, and back panels are complete.
- The shower base is not included, and you must confirm the opening and base arrangement before installation.
- The listed 28.5-inch walk-in dimension should be checked against your planned entry space.
Feature Snapshot
Who It Suits Best
This enclosure fits you best when you are refreshing a tub surround and want clear glass, adjustable width, and sliding access.
Reach For A Different Pick When
Consider the WOODBRIDGE 60 x 30 in Heated Alcove Jetted Tub instead when you need a complete tub, jets, heating, and integrated alcove installation rather than only a door.
A jetted tub becomes much more useful when the water stays warm through a long soak, and this alcove model includes an inline heater alongside nine adjustable jets. The WOODBRIDGE 60 x 30 in Heated Alcove Jetted Tub measures 60 by 30 inches externally, with a 54.5-inch interior length and seating area measuring 41.75 inches. For a planned renovation, it combines bathing and hydrotherapy in a conventional rectangular footprint.
Unlike the EMPAVA 60 in Jetted Acrylic Soaking Tub, this model actively heats water to 100°F and adds colored lighting, a removable service panel, and a three-sided tiling flange. You gain more built-in functions, but the electrical, drain, and alcove requirements make this less suitable for a quick installation.
Strong Points
- Nine adjustable jets let you direct water toward your back, legs, or feet.
- The inline heater helps maintain a warm bath during an extended soak.
- Three-sided tiling flange creates a clean connection between the tub and surrounding finished walls.
- Seven lighting colors add an adjustable visual element to the bathing area.
- The removable apron panel gives service access to internal components.
Trade Offs
- Installation requires two 110- to 120-volt, 15-amp GFCI-protected circuits.
- The left drain position must fit your existing plumbing layout.
- The 60-inch width and three-sided flange demand careful alcove planning.
Technical Highlights
Built With In Mind
This model suits homeowners planning a full alcove renovation who want coordinated jets, water heating, lighting, and wall finishing.
Where Another Pick Suits Better
The EMPAVA 60 in Jetted Acrylic Soaking Tub is easier to place against one, two, or three walls when your renovation layout offers more flexibility.
Wall placement often determines whether a rectangular jetted tub works in your bathroom. The EMPAVA 60 in Jetted Acrylic Soaking Tub has a finished three-sided apron, so you can position it against one, two, or three walls without relying on a fixed alcove configuration. That flexibility makes it a practical option when your tile, vanity, or doorway arrangement is still evolving.
Its 11 adjustable jets cover the back, legs, and feet, while the interior bottom measures 35.8 by 19.7 inches. Compared with the WOODBRIDGE 60 x 30 in Heated Alcove Jetted Tub, this model has more jets but no built-in heater. The reinforced acrylic slows heat loss, yet it does not actively maintain a selected water temperature.
Why It Works Well
- The three-sided apron supports several common wall configurations.
- Eleven adjustable jets provide targeted flow for the back, legs, and feet.
- The acrylic construction offers a lighter, easier-to-position option than many solid fixtures.
- Its overall footprint stays close to a standard 60-inch alcove tub.
Points To Note
- There is no built-in heater, so long soaks depend on the water retaining heat naturally.
- You need to plan a 110- to 120-volt, 15-amp circuit along with hot and cold inlet valves.
- A floor drain hole is also required for installation.
- Check the 35.8-by-19.7-inch interior bottom to confirm it suits your preferred posture.
Whose Shelf It Belongs On
This tub best fits homeowners who want adjustable massage jets and flexible wall placement without built-in water heating.
Skip It When
Choose the WOODBRIDGE 60 x 30 in Heated Alcove Jetted Tub instead when maintaining warm water and integrated lighting matter more to your bath routine.
A 72-inch soaking tub changes the scale of a bathroom, and you need a dedicated room with enough floor space to make that footprint worthwhile. The WOODBRIDGE 72 in Double-Slipper Jetted Tub combines whirlpool jets, air bubbles, active heating, and two sloping ends. For a spacious primary bathroom, the 41.75-by-22.875-inch seating area gives the model a more relaxed, reclining character.
Compared with the oval WOODBRIDGE 61 in Stone Resin Oval Soaking Tub, this design prioritizes powered bathing functions and a 65-gallon capacity. You may find the double-slipper shape more useful for stretching out, while the stone-resin model offers a deeper, more enclosed soaking form.
Strengths Worth Knowing
- Whirlpool jets and air bubbles provide two distinct forms of water movement.
- Heated water support is built in for longer soaking sessions.
- The dual-slipper shape accommodates reclining positions better than many straight rectangular tubs.
- A 14.5-inch water depth to overflow creates a substantial soak.
Factors To Consider
- The 72-by-35-3/8-inch body needs a large bathroom and a generous service area.
- The 65-gallon capacity requires plenty of water and a suitable filling setup.
- Its powered and heated functions make it more installation-heavy than a basic soaking tub.
Product Snapshot
The Right Fit
This model suits you best when you have a large bathroom and want a heated, jetted double-slipper experience built around reclining.
Swap It Out When
The WOODBRIDGE 61 in Stone Resin Oval Soaking Tub suits you better when you prefer a deeper oval shape and integrated drain and overflow trim.
An oval soaking tub brings a softer visual shape to a bathroom and can feel more enclosed during a deep soak. The WOODBRIDGE 61 in Stone Resin Oval Soaking Tub combines a 61-inch length with a matte white finish, thick solid walls, and a 71-gallon capacity. The substantial construction is intended to hold warmth, making this a strong fit for a modern primary bath built around relaxation.
Compared with the WOODBRIDGE 72 in Double-Slipper Jetted Tub, this model trades powered jets and dual seating for a deeper oval basin. Its integrated slotted overflow and drain reduce separate visible trim pieces, while the absence of listed jets keeps the focus on still-water soaking. You should still confirm the tub’s complete footprint, including clearance around its curved sides.
Where It Delivers
- Thick walls help retain warmth through a longer soak.
- The 71-gallon capacity supports deep, shoulder-high immersion.
- The oval profile gives the room a softer, more contemporary appearance.
- The integrated slotted overflow and drain create a cleaner visual arrangement.
- Matte white suits modern, neutral bathroom palettes.
Where It May Fall Short
- The 61-inch length and curved sides need careful clearance planning.
- No massage jets or built-in heater are listed, so the experience centers on still-water soaking.
- A 71-gallon fill volume requires a practical water supply and draining plan.
Core Details
Who Will Love This
This tub suits you best when your bathroom has room for a generous oval fixture and your priorities are deep soaking, retained warmth, and clean visual lines.
A Better Fit Elsewhere
The WOODBRIDGE 72 in Double-Slipper Jetted Tub suits you better when you want reclined seating, powered jets, air bubbles, and heated water.
Match The Tub To Your Bathroom Plan
Begin With The Opening
Measure the finished opening, doorway, and clear floor space before focusing on decorative details. A nominal 60-inch tub still needs room for side clearances, and an oval model needs more usable space around its curved exterior than its length alone suggests. A conversion kit also depends on the dimensions and shape of your existing tub, so measure twice before ordering.
Understand The Installation
A portable tub needs a workable filling and draining plan. An alcove jetted tub needs dedicated plumbing, electrical capacity, and a finished wall design. The EMPAVA model accepts several wall arrangements, while the WOODBRIDGE heated alcove model calls for two 15-amp GFCI-protected circuits. Review the installation requirements before selecting a fixture based on appearance alone.
Choose The Bathing Experience
Jets create directed water movement, and an inline heater actively maintains a selected temperature. A portable folding tub prioritizes storage, while a stone-resin soaking tub emphasizes depth and heat retention. The CleanCut kit serves a different purpose entirely, preserving a full bath while adding a lower shower entry. Your daily routine should determine which feature carries the most value.
Practical Lessons Before Installation
Common Shopping Slip Ups
Measuring only the advertised tub length often leads to an installation headache. Check finished walls, door swings, nearby fixtures, filling access, drain placement, electrical circuits, and service clearance. A shower door also needs the final opening dimensions after tile and trim are installed.
What Separates Premium From Basic
Higher-tier tubs add functions such as adjustable jets, active heating, lighting, or thicker heat-retaining walls. Those upgrades are worthwhile for frequent soaking and a dedicated bathroom, but a portable tub or conversion kit may serve a smaller space more effectively. Choose added features only when your room and plumbing can support them properly.
Frequently Asked Questions
What type of bathroom tub is easiest to install?
The BELOAFIE Foldable Adult Soaking Bathtub is the simplest option because it assembles into a portable structure and needs no permanent alcove installation. You still need access to water and a suitable draining method.
Can a conversion kit make an existing tub easier to enter?
Yes. The CleanCut Convertible Tub Conversion Kit creates a lower step-through section with a removable center insert. Your existing tub must fit the conversion layout, and you will need to measure the opening and surrounding surfaces.
Do jetted bathtubs heat the water automatically?
Not every jetted tub includes a heater. The WOODBRIDGE 60 x 30 in Heated Alcove Jetted Tub has an inline heater, while the EMPAVA 60 in Jetted Acrylic Soaking Tub does not actively heat its water.
What should I measure before buying a shower door?
Measure the width and height only after the walls, tile, and back panels are finished. For the WOODBRIDGE 56-60 in Frameless Sliding Shower Door, check the 56- to 60-inch adjustment range, 66-inch height, and available entry space.
Which tub works best for a small bathroom?
The CleanCut Convertible Tub Conversion Kit suits an existing compact tub, while the BELOAFIE Foldable Adult Soaking Tub can be stored away between uses. Both are more practical than installing a large permanent soaking fixture in limited floor space.
Final Verdict
Your best bathtub choice depends on the space you have and the bath you want. Accessibility calls for the CleanCut conversion kit, limited storage favors the BELOAFIE folding tub, and a planned renovation opens the door to jetted alcove models. For a spacious primary bathroom, the WOODBRIDGE soaking tubs provide the most immersive layouts and the most demanding installation requirements. Measure first, then select the model that fits both your room and your routine.






