A cracked lens, yellowed grille, or loose cover can make a perfectly good exhaust fan look neglected. Replacing the assembly is often simpler than replacing the entire fan, but the model number, mounting style, and opening size must all line up. These options cover several common Broan-NuTone, Panasonic, and universal replacement applications, helping you restore ventilation without disturbing the surrounding ceiling.
The Leading Options At A Glance
Broan S97013662 Grille and Lens Assembly for 655-656 Series
Hon&Guan 4-Inch Magnetic Vent Cover
Broan-NuTone FGR101 Grille Cover
Trasylph 9.65-Inch Bathroom Exhaust Fan Cover with Springs
superbobi 13-Inch FV-GL3TDA Grille
superbobi 97011790 Wall Fan Grille
Deuovht 85315000 Grille and Lens Assembly for Broan-NuTone
A Breakdown Of The Leading Choices
A tired, discolored grille can make an older ceiling fan the weakest part of an otherwise tidy bathroom. The Broan S97013662 replaces both the grille and lens for models 655, 659, 695, HFL695, and 656, making it a sensible choice when both pieces need attention.
For a 695 or 655 installation, model-specific guidance is more useful than a universal fit claim. You still need to compare the fan housing and reflector opening, but the listed model numbers narrow the field considerably.
The Case For It
- Combines the grille and light lens in one replacement.
- Matches five named Broan fan models.
- Restores a coordinated appearance to a dated fixture.
- Part number S97013662 helps prevent an ordering mismatch.
Things To Consider
- It is limited to the listed Broan models rather than a universal fit.
- Confirm both the overall opening and lens opening before ordering.
Key Specs
Who It Suits Best
You benefit most from this option when your Broan fan carries one of the listed model numbers and both its grille and lens appear worn.
Look Elsewhere When
Broan-NuTone FGR101 is a better fit for a supported fan that uses a separate spring-mounted grille rather than a combined grille-and-lens assembly.
This cover belongs on an exterior wall rather than inside a ceiling housing. The Hon&Guan 4-Inch Magnetic Vent Cover suits a bathroom exhaust duct, dryer hose, or other outdoor termination, especially where rain and cold air enter through an open pipe.
The magnetic flap closes against the outlet, while the inclined housing helps redirect incoming weather. That makes it fundamentally different from the interior grille options elsewhere in this roundup.
Standout Benefits
- 304 stainless steel withstands outdoor moisture and heat better than ordinary iron or plastic covers.
- The magnetic flap helps close gaps when the vent is idle.
- Removable mesh blocks birds and rodents while allowing airflow.
- Foam components soften the sound of the flap opening and closing.
- Four screws and pre-drilled holes simplify exterior installation.
Practical Considerations
- The through-wall pipe is listed as 2.24 inches long.
- The neck measures 3.90 inches, with a 3.81-inch inner opening.
- Its exterior location makes it unsuitable for replacing an interior fan grille.
Technical Sheet
Made For
This option fits homeowners replacing a 4-inch exterior bathroom or dryer vent in a climate with rain, wind, pests, and cold air.
Not Your Match When
Trasylph 9.65-Inch Bathroom Exhaust Fan Cover with Springs is the better choice for an indoor ceiling grille rather than an exterior termination.
For a plain, slightly yellowed grille, the Broan-NuTone FGR101 offers a low-profile visual refresh without replacing the fan motor. It fits a broad group of Broan and NuTone models, including 670, 671, 688, 688E, 689, 695, 696N, 696NE, 771, E050, and E070.
Spring supports make this practical for apartment residents and homeowners who want a quick ceiling update. You may still need to handle the fan housing carefully, but the product does not call for cutting or patching the ceiling.
Notable Gains
- Covers a wide selection of supported Broan-NuTone models.
- Low-profile construction creates a neat appearance against the ceiling.
- Spring mounting avoids cutting or patching the existing ceiling opening.
Points To Keep In Mind
- The housing opening must be 7-1/2 by 7-1/4 inches.
- This replacement is for the grille only, so an aging light lens remains separate.
Best Suited To
You get the most from this pick when the fan works properly and only its ceiling grille has become stained or damaged.
Reach For A Different Pick When
Broan S97013662 Grille and Lens Assembly suits you better when both the grille and light lens need replacement on a supported model.
Square grilles can be tricky to replace because the visible opening and the hidden mounting points rarely match perfectly. The Trasylph 9.65-Inch Bathroom Exhaust Fan Cover uses two short springs to grip the housing from behind, making it a practical choice for a simple indoor refresh.
Its 9.65-inch square face is designed to blend into a typical bathroom ceiling. Compared with the Broan-specific options, it offers broader placement flexibility, though the listed dimensions still matter.
What Helps Most
- Two included short springs simplify attachment.
- The square 9.65-inch face suits many ceiling openings without looking oversized.
- ABS plastic provides a lightweight replacement panel.
- The grille can serve square ceiling or wall-mounted ventilation fans.
Worth Noting
- It does not include a light lens.
- The product lists compatibility broadly without naming specific fan models.
- Measure the existing opening and mounting points before ordering.
Quick Facts
Made For
This grille best suits apartment residents replacing a square indoor cover where a simple spring-held installation is desired.
Consider Something Else When
superbobi 13-Inch FV-GL3TDA Grille is the better fit for a supported 13-inch Panasonic fan with a named model number.
A 13-inch ceiling opening calls for a cover with an equally generous footprint, and the superbobi FV-GL3TDA is designed around that scale. It fits numerous Panasonic WhisperCeiling DC and WhisperFit EZ models, including the FV-0511VQ1 and FV-1115VQ1.
The beveled slots support airflow while the ABS construction keeps the panel lightweight in a humid room. Rear springs also help hold the grille in place, though model identification remains the important first step.
Useful Highlights
- Covers an extensive list of Panasonic exhaust fan models.
- The 13-inch square face suits larger ceiling housings.
- Slotted, beveled edges support continued ventilation.
- Rust-resistant ABS resists cracking and warping.
- Spring attachment helps limit movement and operational noise.
Trade Offs
- Its 13-inch size is unsuitable for smaller square grilles.
- Keep the fan body at least 6 inches from the wall as specified.
- It is not intended for cooking areas with heavy oil fumes.
Right Fit For
You should favor this grille when your Panasonic fan has a listed FV model and a 13-inch square opening.
Where A Sibling Pick Shines
Trasylph 9.65-Inch Bathroom Exhaust Fan Cover with Springs is a closer fit for a smaller square opening without a listed Panasonic model requirement.
Through-wall fans need a different mounting approach from ordinary ceiling grilles. The superbobi 97011790 Wall Fan Grille fits Broan and NuTone models 503, 505, 507, 509S, and 509SMG, including the 509S-A and 509S-B versions.
Its kit includes a mounting bracket, three threaded-rod lengths, a grille knob, and a speed-control knob. That complete hardware set makes this more involved than a spring-mounted ceiling replacement, but it gives you several installation options.
What It Does Well
- Supports several older Broan through-wall fan models.
- Includes the bracket, rods, grille knob, and speed-control knob.
- Heat-resistant plastic suits a bathroom fan environment.
Some Limits To Know
- It is intended for wall-mounted fan housings rather than standard ceiling grilles.
- Power must be disconnected before removing the old grille.
- The model determines which threaded-rod length must be used.
Core Details
Whose Shelf It Belongs On
This kit suits a homeowner restoring a supported through-wall bathroom fan with the correct model-specific mounting hardware.
Swap It Out When
Broan-NuTone FGR101 Grille Cover is easier for a supported ceiling-mounted fan that uses a simple spring-mounted grille.
The Deuovht 85315000 restores both the grille and lens on a long list of Broan-NuTone housings, including 663, 669, 763RL, and 769RL variants. It solves the visual problem created by yellowing, scratches, or a damaged light cover without replacing the complete fan.
The reflector-clip attachment differs from the spring systems used by several other picks. That distinction matters because a cover can look right in the hand yet fail to connect correctly to a different housing.
Positive Points
- Replaces the grille and lens together.
- Supports numerous Broan-NuTone model variations.
- ABS construction is designed to resist yellowing and detachment.
- Direct reflector-clip mounting avoids spring hardware.
Possible Compromises
- The package contains only the grille and lens.
- Your housing must use the specified reflector-clip connection.
Feature Facts
Who Will Love This
This assembly appeals to you when your supported Broan-NuTone model uses a reflector clip and both grille and lens need a coordinated replacement.
Another Choice May Suit
Deuovht’s Broan S97013662 Grille and Lens Assembly fits supported Broan models that use a different combined replacement format.
What To Check Before Buying A Replacement
Start With The Fan Model
The model number printed on the motor housing or grille gives you the most useful starting point. It narrows the field to parts with the correct attachment method, dimensions, and lens arrangement. A cover that looks similar from below can still attach differently inside the housing.
Match The Mounting Method
Spring clips, reflector clips, screws, and threaded rods are not interchangeable. The Broan-NuTone FGR101 uses a spring-mounted grille, while the Deuovht 85315000 relies on a reflector clip. Compare the existing attachment method before measuring the visible face.
Check The Opening And Included Parts
Overall dimensions describe the visible grille, while the lens opening indicates the space reserved for the light. For through-wall fans, the housing depth also determines the required rod length. The package should contain every bracket, screw, spring, or knob needed for the specified installation.
Match The Location
Interior ceiling grilles and exterior wall covers serve different purposes. The Hon&Guan 4-Inch Magnetic Vent Cover is an exterior termination for a pipe opening, while the other options replace indoor grilles. Using the wrong location can leave you with incompatible dimensions and mounting methods.
Common Mistakes Worth Avoiding
Wrong Turns To Avoid
A matching brand is not enough because replacement parts can differ by model, size, and connection style. Measure the opening, photograph the mounting points, and check the fan label before ordering. Do not assume that a grille sold for a bathroom can replace an exterior wall vent.
What Separates Premium From Basic
A model-specific combined assembly can cost more because it includes a lens, specific geometry, and a defined attachment method. That added precision is worthwhile when both pieces look worn or the housing is uncommon. A simple spring grille makes more sense when the fan is otherwise sound and the opening matches standard dimensions.
Frequently Asked Questions
How Do I Know Which Bathroom Fan Cover Fits?
Check the model number on the fan housing, then compare it with the cover’s supported models and dimensions. Also confirm whether the replacement uses springs, clips, screws, or threaded rods.
Can I Replace Just the Grille?
Yes, provided your fan uses a grille-only replacement with matching dimensions and mounting points. The Broan-NuTone FGR101 and Trasylph 9.65-Inch Bathroom Exhaust Fan Cover are grille-only choices, while the Broan S97013662 and Deuovht 85315000 include a lens.
Do Bathroom Fan Covers Include a Light Lens?
Not always. Some options include both the grille and lens, while others contain only the vent cover. Check the package description and included-parts list before ordering.
What Size Bathroom Exhaust Fan Grille Do I Need?
Measure both the visible opening and the distance between mounting points. Ceiling fans may require a square cover, while through-wall models can use a grille secured by a bracket and threaded rod.
Can I Use an Exterior Vent Cover Indoors?
An exterior cover uses weather-resistant construction and a flap intended to close against an outdoor pipe opening. Interior ceiling fans need a grille that fits the housing and connects to its attachment points.
Final Verdict
The right bathroom fan cover comes down to model, mounting style, and whether you need a lens as well as a grille. Match the housing before considering appearance, and use the exterior option only for a compatible outdoor termination. Once those details align, replacement can restore a tired fixture with minimal disruption to the room.